This is a complete recessed luminaire with a length of 100 cm.

Thanks to the integrated light switch (see detail view), this LED light bar can be operated without an external switch!

In addition, this light bar has 2 inserted magnets each on the ends of the back, whereby this light bar is independent on all metallic substrates.

Our opinion:
Light color: warm white (about 3000 Kelvin)
Luminous flux: approx. 1350 lumens
Input voltage: 12-14 volts DC
Consumption: approx. 18 watts
Beam angle: approx. 140 °
Dimmable: Yes, (but not when connected in series)

Connecting cable 23,5cm with plug / plug 3,5x1,35mm.
This connection cable is u.a. with our light strips with a connection 3,5x1,35mm inserted around eg. connecting two strips together over a corner.
By disconnecting a jack plug, it can also be used as a kurtzes connection cable.

Connecting or extension cable 210 cm with 1x hollow plug 90° angled / 1x hollow socket 3,5x1,35mm.
This extension cable is used i.a. used in our light strips with a connection 3,5x1,35mm

Needed to connect our light strips with sensor switch to the power supply over a longer distance (part numbers 1190, 1191, 1321, 1400 and 1439).

5.5mm socket with screw connection for connection cable

Since this switch was part of a new rail foot (Art.Nr.:1444), one of the two solder strands is already provided with solder.

The lighting can be operated directly at the receiver and via the radio remote control also from the outside in the rooms (similar to a radiotelephone).