New Products

12V LED Dometic busbar light bar TL320

Simply insert the two holders into the busbar, hold the swiveling light strip between the holders and push the holders together and the ambient light over the table and bed is ready!

This light bar is, inter alia, built in Dethleffs, Knaus and LMC motorhomes and caravans.

Our opinion:
Light color: warm white (about 2900 Kelvin)
Luminous flux: approx. 115 lumens
Input voltage: 12 volts DC
Consumption: about 0,9 watts
Beam angle: approx. 120 °

12V LED Dometic busbar light bar TL400

Simply insert the two holders into the busbar, hold the swiveling light strip between the holders and push the holders together and the ambient light over the table and bed is ready!

This light bar is, inter alia, built in Dethleffs, Knaus and LMC motorhomes and caravans.

Our opinion:
Light color: warm white (about 2900 Kelvin)
Luminous flux: approx. 145 lumens
Input voltage: 12 volts DC
Consumption: about 1.1 watts
Beam angle: approx. 120 °

This recessed spot is factory, inter alia, built at Hymer and LMC campers and caravans.

Our opinion:
Voltage: 9-16V DC
Lumen: approx. 220
Kelvin: about 3000
Beam angle: approx.120 °
Hole size Ø: 56 mm
Installation depth: 20 mm

Our opinion:

Voltage: 10-30V DC / 10-18V AC
Lumen: approx. 350
Kelvin: about 3000
Dimmable: yes
Beam angle: approx. 300 °

MR8 GU4 Power Led 1W 10-30V 30 ° warm white

We have this LED light source, among others especially for Christmas lights, Christmas houses, model houses, light houses, etc. to let produce. It is ideal as a replacement for the MR8 8W or 10W halogen lamps.

Our opinion:
Voltage: 10-30V DC / 10-18V AC
Lumen: approx. 100
Kelvin: about 2700
Dimmable: yes
Beam angle: approx. 30 °

SES Spotmat rotary dimmer 12V DC

particularly suitable for on-board systems
Use of LED strips and LED
Matching switches / sockets from Berker
simple push-turn operation
Driver and dimmer in one housing

This is a complete LED light bar with a high CRI value of> 80 (illuminated objects are reproduced very true to color).

This LED light bar is switched on and off by the integrated motion detector.

Our opinion:
Light color: warm white (about 2800-3000 Kelvin)
Luminous flux: approx. 400 lumens
Input voltage: 10-30 volts DC
Consumption: approx. 7 watts
Motion detector: approx. 5 meters range, 60 seconds
Detection angle: 90 °
Beam angle: approx. 110 °
Housing color: silver-gray
Filter disc: satin

It is a very nice flat, light, compact Surface mounted spot with the Dometic item number 70313.2212  It was mainly installed in Dethleffs and Pössl motorhomes.

It is a very nice flat, light, compact track spot with the Dometic item number 70313.8765  It was mainly installed in Dethleffs and Pössl motorhomes.

This is a complete LED light bar with a high CRI value of> 90 (illuminated objects are reproduced very true to color).

This LED light bar is switched on and off by the integrated sensor light switch. Holding the sensor switch dims the light bar brighter or darker. When switched off, the sensor switch lights up weakly blue as an orientation light.

Our opinion:
Light color: warm white (about 3000 Kelvin)
Luminous flux: approx. 400 lumens
Input voltage: 10-30 volts DC
Consumption: approx. 8 watts
Beam angle: approx. 110 °
Dimmable: Yes, via integrated dimmer
Housing color: silver-gray
Filter disc: satin

This is a complete LED light bar with a length of 50 cm.

Thanks to the integrated sensor light switch, this LED light bar is switched on and off. By holding the sensor switch, the light bar is dimmed brighter or darker. When switched off, the sensor switch lights up, as an orientation light, slightly blue.

Our opinion:
Light color: warm white (about 3000 Kelvin)
Luminous flux: approx. 450 lumens
Input voltage: 10-30 volts DC
Consumption: approx. 8 watts
Beam angle: approx. 110 °
Dimmable: Yes, via integrated dimmer
Housing color: silver-gray
Filter disc: satin

Outdoor lights dimmable with panic function - as flexible as never!

The new generation UL-Li-35 and 50 is here!

Minimally invasive installation & panic function

The popular ambient light of the "UL" series with the light colors 3500K and 5000K has been completely redesigned. In particular, there are many technical innovations. For the installer, there is a great relief: The connection has been greatly simplified; There are no additional components necessary.

A control LED can optionally be connected to check the status of the luminaire from the inside. This is important to avoid accidental power-up.

The new design of the housing prevents backwater on the top and in the cooling slots. LumiCoin invested in new techniques and equipment for casting.

A fantastic reading spot for the sleeping area!

In this spot with 4000 Kelvin (no bluish light!), The book page is not yellowish (like 2700 Kelvin) but actually white!

Our opinion:
Voltage: 10-30V DC
Lumen: approx. 210
Kelvin: about 4000
Beam angle: approx. 30 °
Dimmable: yes

Our opinion:
Voltage: 10-30V DC / 10-18V AC
Lumen: about 550
Kelvin: about 3000
Beam angle: approx. 270 °
Dimmable: Yes

Due to an order of the Kraftfahrt-Bundesamt (Federal Motor Transport Authority), we are no longer allowed to offer the product listed here for sale to customers within Germany. However, we can help you.

Please contact us by telephone between 13.00-21.00 on 038755 20555.

Customers from other European countries as well as from Switzerland and Liechtenstein can still order this product in our shop.

Our opinion:
Voltage: 10-30V DC / 10-18V AC
Lumen: about 350
Kelvin: about 3000
Beam angle: approx. 270 °
Dimmable: Yes

Due to an order of the Kraftfahrt-Bundesamt (Federal Motor Transport Authority), we are no longer allowed to offer the product listed here for sale to customers within Germany. However, we can help you.

Please contact us by telephone between 13.00-21.00 on 038755 20555.

Customers from other European countries as well as from Switzerland and Liechtenstein can still order this product in our shop.

Note: In the Federal Republic of Germany not yet approved in the marine sector (only for export for signal lights)

Our opinion:
Voltage: 10-30V DC
Lumen: about 380
Kelvin: about 2700
Dimmable: yes
Beam angle: approx. 330 °

This 10-15V LED spotlight is u.a. built in Dethleffs and Pössel motorhomes.

Our opinion:
Voltage: 10-15V DC
Lumen: approx. 135
Kelvin: about 3000
Beam angle: approx.120 °
Hole size Ø: ca. 55 mm
Installation depth: 22 mm
Dimmable: Yes

Cable is coated with a 8.5 cm abrasion and heat resistant hose.
Cable ends are provided with solder.
Includes two 3.5mm mounting holes.

This recessed light is characterized by a turnable and tiltable bulb insert. This makes it ideal as an adjustable reading spot under the upper cabinets!

This spot is factory-like u.a. installed at Adria and various other vehicle manufacturers in campers and caravans,

Our opinion:
Hole size Ø: 58 mm
Installation depth: 15 mm

This LED board is just awesome!
Simply insert and dim with the existing light switch!

Further information can be found on the detail view page.

To get to the detailed information, please click on the picture or the article name.

Our opinion:
Voltage: 10-30V DC
Lumen: approx. 170/110/55
Kelvin: about 2700
Beam angle: approx. 125 °
CRI:> 90 (90% color reproduction)
Dimmable: Yes (via 3-stage switching dimming / 0-12V DC)

A bright bulb with a protective cap!

Our opinion:
Voltage: 10-30V DC / 10-24V AC
Lumen: about 400
Kelvin: about 2700
Beam angle: approx. 300 °
Dimmable: no

A bright bulb with a protective cap!

Our opinion:
Voltage: 10-30V DC / 10-24V AC
Lumen: about 230
Kelvin: about 2700
Beam angle: approx. 300 °
Dimmable: no

very well suited as background or backlight.

Our opinion:
Voltage: 10-30V DC / 10-18V AC
Lumen: about 125
Kelvin: about 3000
Dimmable: yes
Beam angle: approx.125 °

LED gooseneck light L80TM USB 10-15V DC
Light base with two integrated USB charging ports (1A and 2A).
Due to the high radiation angle of about 125 ° ideal for the living area.

Not dimmable.

LED gooseneck light L70TM chrome 10-15V DC
Including sensor touch with 3 switching levels, 1. Off, 2. Switch on the blue nightlight, 3. Switch on the light.

Due to the high radiation angle of about 125 ° ideal for the living area.

Not dimmable.

Berker IntegroFlow / Pure rocker switch

This switch is a normal double-light switch.

This rocker switch we offer in 6 different colors:

1. Black shiny
2. Brown matt
4. Shiny gray
5. Chrome painted matt
6. Stainless steel painted
7. Polar white high gloss

To select the colors, please click on the image, then on the next page top right on "Please select".

Berker IntegroFlow / Pure changeover switch

This switch is a normal light switch, which can also be used as a changeover switch.

We offer this change-over switch in 6 different colors:

1. Black shiny
2. Brown matt
4. Shiny gray
5. Chrome painted matt
6. Stainless steel painted
7. Polar white high gloss

To select the colors, please click on the image, then on the next page top right on "Please select".

The lighting can be operated directly at the receiver and via the radio remote control also from the outside in the rooms (similar to a radiotelephone).

If you do not like the individual LED spots distributed over the entire area, then we have a very good alternative for you. With this LED bulb, the light is emitted only from the center (as in a halogen pin base bulb).

Our opinion:
Voltage: 10-30V DC / 10-24V AC
Lumen: about 240
Kelvin: about 3000
Beam angle: approx. 360 °
Dimmable: yes

The area of use is almost inexhaustible!

Here are some examples: indirect lighting in front of the window, over the cabinets, in wardrobes, at the outer awning, in the garage, under the front edge of the kitchen worktop, in drawers, in the exchange of fluorescent tubes ... etc.
For outdoor installation, the light strip on the back is provided with a water-repellent (antifreeze) foam layer!

We offer the light band in 3, 4 and 5 meters in length!

Our opinion:
Voltage: 11-14V DC
Lumen: about 350 per meter
Kelvin: about 2500-2800
Beam angle: approx.120 °
Dimmable: yes
Protection class: IP65 (protection against jet water (nozzle) from any angle)
Cable length: approx. 23 cm

Rocker switch for Dometic lights in silver or black

To select the variations, please click on the picture or the article name.

SES LEDmat® backlight LED dimmer

especially suitable for on-board systems
Use of LED strips and LED
suitable switches / sockets from Berker
simple touch operation
Driver and dimmer in a housing
Versions: LED backlight
automatic switch-off function

Berker Integro Flow button / closer

When you press the button, the circuit is closed and disconnected when you release it.

Used in conjunction with the LumiCoin PWM dimming module LC-DIM-1 for dimming.

This button is available in 7 different colors:

1. Black shiny
2. Brown matt
3. matt anthracite
4. Shiny gray
5. Chrome painted matt
6. Stainless steel painted
7. Polar white high gloss

To select the colors, please click on the image, then on the next page top right on "Please select".

The lamp shown in the picture has a chrome ring!
 

This lamp with the 3 LEDs was among others installed in the roof window (4 pcs.) on newer Hymer motorhomes and caravans.

Important note about the connection cables:
Red cable is plus, black cable is minus

If the polarity is not observed and the luminaire is destroyed as a result, no replacement will be provided.

Note: This light can not be used otherwise!

Our opinion:
Voltage: 12-24V DC
Lumen: about 1000
Kelvin: about 3000
Beam angle: approx. 220 °
Dimmable: No

Note: This bulb must not be used in the high-voltage range!

Our opinion:
Voltage: 10-36V AC / DC
Lumen: about 700
Kelvin: about 3000
Beam angle: approx. 200 °
Dimmable: no

Note: This bulb must not be used in the high-voltage range!

A super bright bulb!

Our opinion:
Voltage: 10-30V DC / 10-18V AC
Lumen: about 550
Kelvin: about 2700
Beam angle: approx. 300 °
Dimmable: yes

A fantastic reading spot for the living area!

Our opinion:
Voltage: 10-30V DC
Lumen: approx. 200
Kelvin: about 2700
Beam angle: approx. 30 °
Dimmable: yes

If you do not like the individual LED spots distributed over the entire area, then we have a very good alternative for you.

Our opinion:
Voltage: 10-30V DC
Lumen: approx. 160
Kelvin: about 2700
Beam angle: approx. 120 °
Dimmable: yes

Product information Cabinet Switch LSS-1-A
mechanical miniature cabinet switch
The cabinet switch is characterized by its tiny dimensions.
It allows the use of any luminaire (as part of the technical data) for illuminating storage spaces, compartments, cupboards or drawers.

Wall lamp LW2
Our wallwashers are waterproof, tiny, sturdy and bright.
They shine flat out of the narrow side only a few millimeters wide.
The LW2 measures only 20x60mm and is 5.5mm flat.
With 1.2Watt, the spotlight is very bright for its small size.
We deliver them in light colors 3500K (warm white) 90 lumens, 5000K (daylight white) 100 lumens.
It is ideal as floor, wall and stair lighting on or in the house, in the garden or on / in the motorhome, boat, yacht or caravan.

Wall lamp LW1 (LumiCoin Environment Light LW11)

Our wall washer "Mini" is only 6mm thin. It shines from the narrow side down (or above).
With 5 watts and fabulous 400/450 lumens, the spotlight is very bright for its small size.
Locations can be found in the garden, on house or motorhome walls, in storage areas or cabinets.
In the boat and yacht area for bathing platform lighting and side gangways on the salon exterior wall.

The spotlight is particularly suitable as an exterior or awning light on the motorhome and caravan.

Our opinion:
Voltage: 8-30V DC
Lumen: approx. 400/420
Kelvin: about 3500/5000

LiLu3 square - the smart lightweight

The LiLu3 is our lightweight with charm. Perfect fields of application can be found on worktops - e.g. in the kitchen - as well as in small rooms at home or in the motorhome or boat. The cabin e.g. A pickup motorhome is already fully lit with a single LiLu, a 3m wide worktop in the kitchen with three pieces in pleasant bright light dipped.

The lamp has a narrow discreet metal edge.
We deliver them in aluminum anodized, chrome or gold plated.
Each individual variant can either be obtained in the standard version without special additional functions or in a dimmable version. The highlight here is the dimming and switching function via touch sensor. Just touch the metal edge to turn the light on or off or dim it.

We offer this LED surface-mounted luminaire in 12 variations (see detailed view).

To select the variations, please click on the picture or the article name.

The USB charging station for your Dometic power rail!

Charge your cell phones and pads with the USB Charger wherever you have a Dometic power rail. Just clip in and get started!

LED Light bar LumiCoin Line light L30 28cm 8-30V

Elongated surface-mounted luminaire with a large beam angle and high power
The L30 is the longer version of the L20.
With 20mm width and 280mm length is perfect for example. for kitchen lighting, 50 high-power LEDs illuminate the diffuser bright and even.
The dimmable version is switched or dimmed directly on the luminaire. It then lights up with the brightness set on the lamp. The D-version has a built-in button for on and off, including dimming function.

Standard version (L) dimmpush-button version (D)

Application: General lighting, showcases, kitchen units
With 2700 or 4000 Kelvin, 490 or 530 lumens, approx. 150 ° beam angle and max. 7 watts consumption a very bright pleasant light!

The lamp is manufactured for optimal heat dissipation of the LED from solid aluminum parts!

This is a lamp from the "luxury forge" LumiCoin and is produced in Germany!

Particularly flat ceiling light, only 4.5 cm high, with flat diffusing glass and 3 diagonally inserted illuminant holders.