Produktbezeichnung |
Stiftsockel G4V 18 LED SMD 10-30V warmweiß |
Artikelnummer |
1153 |
Lichtstrom-Abgabe typ. |
252 Lumen |
Farbtemperatur |
Warmweiß (ca. 3000 Kelvin) |
CRI |
>80 |
Bemessungs- /Nennlebensdauer |
bis zu 50.000 h |
Lichtstromerhalt |
0,7 |
Abstrahlwinkel |
300° |
Sockeltyp (Normbezeichnung) |
G4 |
Verbrauch |
2,3 Watt |
Eingangsspannung |
10-30V DC / 10-18V AC bei 50/60 Hz effektiv |
Ersetzt |
ca. 35W Halogen Stiftsockellampe* |
Dimmbar |
Ja |
Abmessungen |
Ø 18mm x 26,5mm (ohne Stifte) |
Gewicht |
12 g |
Schaltzyklen |
>25.000 |
Farbkonsistenz |
SDCM < 7 (Standard Deviation of Colour Matching) |
Energieeffizienzklasse |
A+ |
Einschaltverzögerung |
keine (<1sek.) |
Ursprungsland |
China |
|
|
*25 W gemäß Tabelle 6 der EU-Verordnung 244/2009
Der Verbrauch in W galt über Jahrzehnte als Vergleichswert für Leuchtmittelalternativen.
Die vorgegebenen Formeln zur Äquivalenzermittlung spiegeln jedoch nicht zwangsläufig den realistischen Ersatz wieder. Die subjektive Wahrnehmung der Helligkeit einer LED-Lampe hängt stark von der Positionierung und Art der Leuchte ab. Die meisten LED-Lampen emittieren das Licht hauptsächlich in eine Richtung. Dies hat zur Folge, dass Lampen mit einem niedrigen Äquivalenzwert laut den EU-Verordnungen als deutlich heller empfunden werden.
|
Product description: Pin header G4V 18 LED SMD 10-30V warm white
Article number: 1153
Lumen output typ .: 252 lumens
Color temperature: warm white (about 3000 Kelvin)
CRI:> 80
Rated / rated service life: up to 50,000 h
Lumen maintenance: 0.7
Angle: 300 °
Socket type (standard designation): G4
Consumption: 2.3 watts
Input voltage: 10-30V DC / 10-18V AC at 50/60 Hz effective
Replaces: approx. 35W halogen pin base lamp *
Dimmable: Yes
Dimensions: Ø 18mm x 26.5mm (without pins)
Weight: 12 g
Switching cycles:> 25,000
Color consistency: SDCM <7 (Standard Deviation of Color Matching)
Energy efficiency class: A +
Switch-on delay: none (<1sec.)
Country of origin: China
* 25 W according to Table 6 of EU Regulation 244/2009
Consumption in W was considered as the comparative value for alternative bulbs for decades.
However, the given equivalence determination formulas do not necessarily reflect the realistic replacement. The subjective perception of the brightness of an LED lamp depends strongly on the positioning and type of the luminaire. Most LED bulbs emit light mainly in one direction. As a result, low equivalent lamps are perceived as much brighter by EU regulations.
|